- #Gitup git2 vga 240fps 1080p
- #Gitup git2 vga 240fps mod
- #Gitup git2 vga 240fps update
- #Gitup git2 vga 240fps full
- #Gitup git2 vga 240fps iso
Also, in modded firmware, 2160p24 16:9 resolution has been changed to non-standard 2880x1620 30FPS, which provides good quality in bright light but is not practical indoors and same as original 2160p24 it suffers from codec bitrate limitations, although not so severe.Ĭurrently I'm working on updates for color correction, and I believe, it should be more natural now. In case higher resolution is required, 1440p seems to be ok.
#Gitup git2 vga 240fps 1080p
I prefer 1080p modes, which seems to be optimal for this hardware. Resolution 2160p24 4:3 seems to be hardware limit for this camera, video in it seems to be not very good, as frames are often skipped and bitrate and framerate are low. I have corrected it for 24/30 FPS modes, while this issue is still not resolved for 60fps, as I have not figured out proper settings for it yet. Also, original firmware has framerates for video 30/60 FPS, while sensor readout timings are set for 23.98/29.97/59.94 FPS, as result, frames are often skipped/duplicated in video, as video recording is out of sync with readout.
#Gitup git2 vga 240fps full
I have switched it to the mode used for 2160p with 4:3, so it should have full FOV now. For 1440p 4:3 same mode is used as for 1440 16:9, so image cropped to 16:9 AR is cropped again for 4:3. It is used for 1080p30/1080p48/1440p in my firmware mode, with same FOV as 1080p60 in original one. I have added support for another sensor mode, which has same image dimensions as one used for 60FPS, but with 12-bit color depth and 48FPS. As result FOV is bit narrower compared to full readout mode, which has 4000x3000, and used for 2160p/1440p in original firmware. 60FPS resolutions are using sensor mode which provides image with dimensions 4096x2160, so it has to be cropped to 3840x2160 to keep aspect ratio 16:9. There are several sensor modes used for different video resolutions, e.g. I believe, due to my changes with sensor modes, things could be even worse at the moment, as video resolutions for WiFi do not match with resolutions with normal mode. I have not checked WiFi mode at the moment, as quite low video quality mode is used in it due to hardware limitations, so it seems pretty useless for me.
#Gitup git2 vga 240fps update
UPDATE (): Modified firmware could be downloaded here but it works fine with 170 ° FOV version, as it was confirmed by several testers. Please note, that it is based on firmware for "no distortion" 90° FOV version of camera, but might be working properly with 170° FOV version, although it has not been tested yet. Make sure, that official firmware v2.2 is installed on the camera before installing this mod. Changed sensor mode for 1440pp30 video resolutions. Image effect "Black and White" has been changed to adjust video luma component to limited range.ĩ. Adjusted settings for noise reduction filters.Ĩ. Doubled bitrates for video (Low: ~32mbps, Med: ~52mbps, High: ~70mbps). Changed sensor timings from 29.97fps to 30fps, 59.94fps to 60fps to match recorded video framerate and avoid frame doubling/skipping.Ħ. AE params and gamma curve for Normal contrast adjusted.ĥ.
![gitup git2 vga 240fps gitup git2 vga 240fps](https://xdrone.altervista.org/xdrone/wp-content/uploads/2017/02/k6.jpg)
![gitup git2 vga 240fps gitup git2 vga 240fps](https://xdrone.altervista.org/xdrone/wp-content/uploads/2017/02/k8.jpg)
Sharpness settings changed: Strong - same as original Normal Normal - external edges disabled Soft - sharpening disabled.ģ. Adjusted parameters for AE for all modes in order to improve highlights in bright light and avoid frame doubling in low light (720p120/VGA240).Ħ. Added missing support for VGA 240fps video resolution.ĥ. Changed sensor timings for 1620pp24 modes to avoid frame doubling/skipping.Ĥ. Tuned noise reduction settings to improve image details and reduce noise level in low light.ģ. Feature "Low Light" is enabled again with following functionality: Low Light On - lowest shutter speed set to 1/30s for 30fps, 1/60s for 60fps (50Hz, will cause flickering with some light sources) Low light Off - 1/50s for 30fps(50Hz), 1/60s for 30fps(60Hz), 1/100s for 60fps (50Hz), 1/60s for 50fps and 60fps(60Hz).ġ. Changed video framerate for 1080p60 from 60fps to 59.94fps to resolve sensor sync issue.ġ. Updated video resolutions for WiFi enabled mode to match new resolutions (1080p50, 1080p48, 1080p25, 1620p30)ġ. Video resolution WVGA replaced with 1080pp25 for High bitrate.Ĥ.
#Gitup git2 vga 240fps iso
Added ISO Limit feature: setting ISO with Shutter Speed Auto will prevent ISO rising higher than specified value, except for ISO 50 - max ISO 6400 will be used.Ģ. Changed Effect Sepia to convert from full range to limited range (same as Black&White) with increased saturation.ġ. Fix issue with broken EIS for 60fps modes.ģ.
#Gitup git2 vga 240fps mod
Git G3 Duo 90 firmware mod (based on official v2.2)ġ.